CNCALPARTS
info@cncalparts.com Request a Quote
Request a Quote
info@cncalparts.com

Aluminum Only Machining

Aluminum CNC Machining

CNCALPARTS is a Shenzhen-based precision CNC machining company focused exclusively on custom aluminum parts. From prototypes to repeat production, we manufacture aluminum housings, enclosures, heat sinks, brackets, plates, structural components, precision turned parts, and complex 5-axis components for customers worldwide.

Request an Aluminum Quote View Capabilities

Quick Facts

Material Focus
Aluminum Alloys Only
Common Grades
6061, 6063, 6082, 7075, 2024, 5052, 5083
Machining
3, 4, 5-Axis Milling & Turning
Tolerance
Down to ±0.01 mm
Finishing
Anodizing, Bead Blasting, Powder Coating

Aluminum CNC Machining Capabilities

We provide CNC milling, CNC turning, multi-axis machining, precision drilling, tapping, boring, and complex aluminum component manufacturing. Every process is tuned around the cutting behavior, chip evacuation, workholding, and deformation characteristics of aluminum.

Milling & Multi-Axis

3-axis, 4-axis, and 5-axis milling up to 1000 × 600 × 500 mm, including deep pockets, thin walls, and multi-sided features.

Turning & Mill-Turn

CNC turning and turn-mill machining up to Ø300 mm diameter and 500 mm length, with concentricity and precision thread control.

Precision & Inspection

Flatness, parallelism, and position tolerances down to 0.02 mm, verified with CMM, height gauges, micrometers, and surface roughness testers.

Capability Typical Range
Materials Aluminum Alloys Only
CNC Milling 3-Axis, 4-Axis, 5-Axis
CNC Turning CNC Turning and Turn-Mill Machining
Maximum Milling Size 1000 × 600 × 500 mm
Maximum Turning Diameter Ø300 mm
Maximum Turning Length 500 mm
Precision Tolerance Down to ±0.01 mm
Surface Roughness Ra 0.8–3.2 µm
Minimum Wall Thickness 0.5 mm
Thread Sizes M1.6 and above
Production Type Prototype, Low Volume, Batch Production
Drawing Formats STEP, STP, SLDPRT, IGES, X_T, DWG, DXF, PDF

Focused on Aluminum

Aluminum machining requires careful control of cutting conditions, chip evacuation, workholding, heat, and deformation. Thin walls can distort, large pockets can release internal stress, cosmetic parts require careful handling, and anodized components require attention to dimensions and surface condition.

Because aluminum is our only material focus, these are the manufacturing challenges we work with every day. That focus shapes our tooling choices, cutting parameters, fixture design, and inspection routines.

We machine aluminum. Only aluminum.

5-axis aluminum CNC machining of a complex component

Custom Aluminum Parts

We manufacture a wide range of custom aluminum components according to customer drawings, 3D models, tolerances, surface requirements, and application needs.

  • Aluminum enclosures and housings
  • Heat sinks and cooling plates
  • Brackets, plates, and frames
  • Motor and camera housings
  • Manifolds and machine components
  • Fixtures and jigs
  • Robotics and automation parts
  • Optical equipment components
  • Precision turned parts
  • Thin-wall and 5-axis parts

From Prototype to Production

CNCALPARTS supports aluminum machining from early prototypes to recurring production. For prototypes, we focus on fast manufacturing and design evaluation. For low-volume and batch production, we focus on stable setups, efficient machining, repeatability, and consistent inspection.

Stage 01

Prototype

1–10 pcs for design validation, fit checks, and fast iteration cycles.

Stage 02

Low Volume

10–500 pcs with stable setups, dedicated fixtures, and repeatable results.

Stage 03

Batch Production

500+ pcs with consistent inspection and recurring order support.

Precision & Complex Machining

  • Tight tolerance machining
  • 3-axis, 4-axis, and 5-axis machining
  • Thin-wall machining
  • Deep pocket machining
  • Precision holes and bores
  • Threaded features
  • Flatness and parallelism control
  • Cosmetic surface machining
  • Multi-sided machining
  • Repeat production

Aluminum Surface Finishing

As Machined
Natural CNC machined surface.
Bead Blasting
Uniform matte finish, often used before anodizing.
Anodizing
Clear, black, and color anodizing for appearance and surface protection.
Hard Anodizing
For applications requiring greater surface hardness and wear resistance.
Brushing & Polishing
For parts requiring specific cosmetic finishes.
Powder Coating
Durable decorative and protective coating.

Quality Control

We review drawings, tolerances, critical dimensions, surface requirements, and inspection needs before production. During machining and final inspection, parts are measured using equipment such as CMMs, height gauges, micrometers, calipers, bore gauges, pin gauges, thread gauges, and surface roughness testers.

Inspection reports, including dimensional inspection reports and first article reports, can be supplied according to project requirements.

CMM Height Gauge Micrometer Caliper Thread Gauge Surface Roughness Tester

Why CNCALPARTS?

We take a focused approach to CNC machining. Instead of processing many different materials, we specialize in aluminum and continuously improve our machining processes around one material category.

This focus supports better understanding of aluminum alloys, tooling, workholding, deformation control, surface finish, anodizing, and production consistency.

We machine aluminum. Only aluminum.

Single-Material Expertise

Tooling, cutting parameters, and fixtures optimized for aluminum alloys only.

Deformation Control

Thin walls, large pockets, and cosmetic surfaces handled with proven strategies.

Anodizing Ready

Dimensions and surface condition prepared for clear, black, color, and hard anodizing.

Engineering Communication

DFM feedback, drawing review, and responsive support from prototype to repeat orders.

Aluminum CNC Machining Guides

Explore our detailed articles on aluminum machining processes, tolerances, finishing, and production planning. Each guide covers practical capabilities, material behavior, and how we approach common manufacturing challenges.

Your Aluminum CNC Machining Partner

Based in Shenzhen, China, CNCALPARTS supports customers in robotics, automation, electronics, optics, industrial equipment, mobility, and other technology-driven industries.

Send us your 3D model and technical drawing to discuss your next aluminum machining project.

Start Your Project
Precision aluminum CNC milling at the Shenzhen facility

Request an Aluminum CNC Machining Quote

Share your drawings, quantities, tolerances, and finishing requirements. Our engineering team will respond with manufacturability feedback and pricing for your aluminum parts.

Email: info@cncalparts.com  ·  Phone:  ·  WhatsApp: