Optical & Imaging
CNCALPARTS machines custom aluminum components for optical and imaging systems — camera bodies, lens housings, optical mounts, and imaging equipment parts where dimensional stability, tight tolerances, and thermal control decide performance. We machine aluminum. Only aluminum.
- Tolerance
- ±0.01 mm
- Axes
- 3 / 4 / 5
- Grades
- 6061 · 7075
- Finish
- Anodizing
Why optical teams choose us
- Aluminum-exclusive machining: tooling, workholding, and cutting parameters tuned for one material family.
- Thin-wall, deep-pocket, and deformation control for optical housings and mounts.
- Anodizing-ready parts with attention to surface condition and critical dimensions.
- Prototype to repeat production with CMM inspection and first article reports.
Precision aluminum for optical and imaging hardware
Optical assemblies rarely fail because of a single part — they drift because of accumulated dimensional error, thermal movement, and unstable mounting interfaces. That is why optical and imaging programs demand a machining partner who can hold flatness, parallelism, and position tolerance across repeated builds.
CNCALPARTS supports camera manufacturers, machine vision integrators, laser and photonics teams, and scientific equipment builders with custom aluminum components machined to drawing. From a one-off prototype to recurring production batches, parts are produced with stable setups and consistent inspection.
Typical optical & imaging aluminum parts
- Camera housings
- Lens barrels & housings
- Optical mounts
- Sensor brackets
- Heat sinks & cooling plates
- Optical benches & frames
Dimensional stability
Flatness, parallelism, and position tolerance down to 0.02 mm for mounts, rails, and sensor interfaces.
Deformation control
Thin walls, deep pockets, and stress-relieved machining strategies that keep optical geometry true.
Thermal management
Heat sinks, cooling plates, and finned housings machined for sensor and laser thermal budgets.
Cosmetic & anodized finish
Bead blasting, brushing, and clear, black, color, or hard anodizing for visible optical hardware.
Inspection you can document
Critical dimensions are verified with CMM, height gauges, micrometers, calipers, bore and pin gauges, thread gauges, and surface roughness testers. Dimensional inspection reports and first article reports are supplied according to project requirements.
Optical & imaging machining guides
Explore our aluminum CNC machining articles for optical and imaging applications — camera components, lens housings, optical mounts, and imaging equipment parts. Each guide covers materials, tolerances, surface finishing, and production considerations for CNCALPARTS customers.
Precision CNC Machined Camera Components & Optical Housings | CNCALPARTS
CNCALPARTS specializes in custom aluminum CNC machined camera components, including housings, mounts, and brackets for machine vision and optical systems.
View details →From prototype to repeat production
Early optical prototypes need fast turnaround and design feedback. Production programs need stable setups, repeatable tooling, and consistent inspection. CNCALPARTS supports both stages with the same aluminum-focused process.
Send STEP, STP, SLDPRT, IGES, X_T, DWG, DXF, or PDF files — we review tolerances, critical dimensions, surface requirements, and inspection needs before machining begins.
Discuss Your ProjectPrototype
1–10 pcs
Fast manufacturing and design evaluation for optical assemblies.
Low Volume
10–500 pcs
Stable setups, efficient machining, and repeatable quality.
Production
500+ pcs
Batch production with consistent inspection and documentation.
Capability snapshot
- Max milling size
- 1000 × 600 × 500 mm
- Max turning diameter
- Ø300 mm
- Minimum wall thickness
- 0.5 mm
- Minimum hole diameter
- Ø1.0 mm
We machine aluminum. Only aluminum.
By focusing on one material category, CNCALPARTS builds deeper experience in aluminum alloys, tooling, workholding, deformation control, surface finish, and anodizing preparation. That focus is why optical and imaging teams trust us with components where precision is not optional.
Based in Shenzhen, China — supporting customers in robotics, automation, electronics, optics, industrial equipment, and mobility worldwide.
Send STEP + PDF drawing for review
Start your aluminum optical component project
Share your 3D model and technical drawing with CNCALPARTS. We will review tolerances, surface requirements, quantities, and inspection needs, then respond with a manufacturing plan for your optical or imaging component.
What to send
- 3D model: STEP, STP, SLDPRT, IGES, X_T
- 2D drawing: DWG, DXF, PDF with tolerances
- Aluminum grade and surface finish requirements
- Quantity: prototype, low volume, or production
- Inspection and reporting requirements